Communication

The inverter is equipped with USB and RS-232 ports and a slot for alternative communication interfaces in order to communicate with a PC via corresponding software. This intelligent slot is install with Modbus card use to communicate with external Energy meter. contact us  for the procedure  to connect communication wiring and install the software.

Please install monitoring software in your computer. Detailed information is listed in next chapter. After software is installed, you may initialize the monitoring software and extract data through communication port.

This unit also equipped with a Wi-Fi transmitter. Wi-Fi transmitter can enable wireless communication between inverter and monitoring platform. Before operating wireless communication, please install WiFi antenna on the unit as shown in the below chart.

Users can access and control the monitored inverter with downloaded APP.  You may find “energy store” app from the Apple? Store or Android?  Store. All data loggers and parameters are saved in iCloud. Before using Wi-Fi transmitter, please connect the external antenna on the side of inverter. 

The Wi-Fi Operation Guide

Wi-Fi module can enable wireless communication between off-grid inverters and monitoring platform. Users have complete and remote monitoring and controlling experience for inverters when combining Wi-Fi module with energy store  APP, available for both iOS and Android based device. All data loggers and parameters are saved in iCloud.

The major functions of this APP:

Delivers device status during normal operation.

Allows to configure device setting after installation.

Notifies users when a warning or alarm occurs.

Allows users to query inverter history data.

Installation

Consider the following points to install the energy storage system:

Do not mount the inverter on flammable construction materials.

Mount on a solid surface

This energy storage system might make noises during operation which may be perceived as a nuisance in a living area.

Install this inverter module at eye level in order to allow the readability of LCD display at all times.

For proper air circulation to dissipate heat and further maintenance, allow a clearance of approx. 50 cm to the sides of the unit.

Dusty conditions on the unit may impair the performance of this inverter.

The ambient temperature should be between 0°C and 40°C and relative humidity should be between 5% and 85% to ensure optimal operation.

For proper operation of this energy storage system, please use appropriate cables for grid connection.

The pollution degree of the energy storage system is PD2. Select an appropriate mounting location. Install the inverter and battery modules in a protected area that is dry, free of excessive dust and with adequate air flow. Do NOT operate it in the place where the temperature and humidity is beyond the specific limits. (Please check the specs for the limitations.)